Straight answers on sizes, thickness, weight, grades, MTC, pricing and ordering — so your enquiry is specification-ready before you send it.
01
What is EN9 Square Bars?
EN9 Square Bars are higher-carbon engineering steel square bars commonly requested as EN9 or 070M55. The exact side size, grade, standard, supply condition and intended use must be stated because the commercial product name alone does not establish chemical, mechanical, dimensional or heat-treatment requirements.
02
What are the main applications of EN9 Square Bars?
Common applications include keys, wear parts, tools and heavy machinery components. Suitability depends on the component design, loads, environment, machining allowance, heat treatment and governing code. Final selection must follow the approved drawing, BOQ, end-user specification and responsible engineer’s approval.
03
Which side sizes are listed for EN9 Square Bars?
The live square-bar chart lists 10 x 10, 12 x 12, 14 x 14, 16 x 16, 17 x 17, 20 x 20, 25 x 25, 32 x 32, 40 x 40, 42 x 42, 50 x 50, 53 x 53, 56 x 56 and 63 x 63 mm. These published entries are not a guarantee of current stock. Confirm the exact side dimension, grade, length, condition and quantity, particularly when a machining drawing requires an unlisted size or minimum clean-up allowance.
04
How should I specify the size and tolerance for EN9 Square Bars?
State the nominal side dimension in millimetres, across-flat tolerance, corner profile, squareness, straightness and surface condition. For machined parts, add the finished component size and machining allowance. Bright and hot-rolled square bars may have different dimensional expectations.
05
What standard lengths are available for EN9 Square Bars?
The reviewed page does not publish a fixed length range. Availability should be confirmed for the requested square size, grade and quantity. State exact or random length, permissible tolerance, cut-length schedule, end condition and whether each piece must be identified to a drawing item.
06
How is EN9 Square Bars weight per metre calculated?
For a solid steel square bar, theoretical weight in kg/m is approximately side in millimetres squared x 0.00785, using nominal dimensions and a typical steel density. Actual or invoiced weight may differ because of dimensional tolerance, density, scale, length and the agreed commercial basis.
07
Can I get a EN9 Square Bars weight chart?
Yes. The live page provides average kg/m and kg/ft values for listed square sizes. Use them for estimation, then confirm the quotation basis and applicable dimensional tolerances. For engineering-grade or special-condition material, ask whether the supplier uses theoretical or actual weighment.
08
What is the EN9 Square Bars price per kg?
The price per kg requires a dated quotation and varies with grade, square size, quantity, supply condition, finish, testing, cutting, packing, freight and taxes. Heat-treatment condition can be important for engineering grades. Send a complete specification for a comparable rate.
09
How is the EN9 Square Bars price per tonne determined?
Price per tonne depends on the exact grade and standard, size mix, bar length, total tonnage, condition, certification, inspection and destination. Confirm whether cutting, heat treatment, testing, packing, freight and GST are included and check the quotation validity.
10
What is the MOQ for EN9 Square Bars?
The live page states a minimum order quantity of 1 tonne. Actual order acceptance remains subject to the required size, grade, condition and availability. For mixed-size orders, give the piece count or weight for each line item so every size can be reviewed.
11
Is EN9 Square Bars available from ready stock?
Stock must be confirmed for the exact side dimension, grade, standard, length, finish, condition and quantity. A live product page or size chart does not establish immediate availability. State any mill or make preference, MTC requirement, inspection plan and required delivery date.
12
Can an MTC be supplied with EN9 Square Bars?
Request the mill test certificate at enquiry stage and state the required document type. It should identify the material, heat or batch, grade, standard and reported chemistry and mechanical results where applicable. Heat-treatment condition, hardness and traceability requirements should be agreed before ordering.
13
How do section size and heat-treatment condition affect EN9 Square Bars?
Weldability and heat-treatment response require review for the actual section and carbon level. Mechanical-property tables should be read with the applicable standard, ruling section and delivery condition. State square size, condition, required hardness or strength and final component heat treatment; do not apply one published value to every bar size.
14
Can EN9 Square Bars be cut, machined, threaded or heat treated?
Processing can be reviewed against the drawing, grade, condition and quantity. Provide cut lengths, tolerances, thread details, machining allowance and required heat treatment or hardness. Final component properties cannot be guaranteed from the bar designation alone; the approved manufacturing route controls the result.
15
Can EN9 Square Bars be replaced with an equivalent grade?
Do not substitute from a web equivalence table alone. Compare full chemistry limits, mechanical properties, section-dependent requirements, delivery condition, hardenability, impact quality, heat treatment and certification. Any alternative requires written approval from the responsible engineer or end user before supply.
16
Can I buy EN9 Square Bars from a supplier in Mumbai or Navi Mumbai?
Ferrite lists its head office in Mumbai and a facility address at Kalamboli, Navi Mumbai. Provide delivery postcode, longest length, total tonnage, unloading constraints and required date so availability and logistics can be reviewed for Mumbai, Navi Mumbai and Maharashtra.
17
Can EN9 Square Bars be supplied across India?
The website states nationwide supply. India-wide enquiries should include the consignee postcode, grade, side size, length, tonnage, packing and delivery schedule. Long-bar freight can materially affect landed price, so compare offers on the same ex-works or delivered basis.
18
Does Ferrite handle export enquiries for EN9 Square Bars?
Export requirements can be reviewed against the requested specification and quantity. Provide destination port and country, Incoterm, grade, standard, side size, length, tonnage, condition, packing, MTC and inspection requirements. Shipping programme and documentation must be confirmed for the specific order.
19
How should quotations from EN9 Square Bars suppliers be compared?
Compare the exact grade, standard, size tolerance, corner condition, length, condition, origin or make if specified, MTC, inspection, cutting, packing, freight, taxes and delivery basis. A lower rate is not comparable if the offered condition, certification or heat-treatment scope differs.
20
What details are needed for a fast EN9 Square Bars quotation?
Send product name, complete grade and standard, square side size, length, piece quantity and total tonnage. Add finish and delivery condition, tolerance, make preference, MTC, inspection or testing, cutting drawing, delivery postcode or destination port, Incoterm and required delivery date.
