Get In Touch

Home > Steel Products > Steel Plates > Stainless Steel Plates > 304 Stainless Steel Plates

304 Stainless Steel Plates

Buy Top Quality 304 stainless steel plate at Ferrite Structural Steels Pvt Ltd. – India’s Leading Supplier, Manufacturer and Exporter of Stainless Steel Plates.

304 Stainless Steel Plates

304 stainless steel plates are highly renowned in the metallurgy and fabrication industries for their exceptional corrosion resistance and versatility. This grade of stainless steel, also known as 18/8 stainless steel, contains 18% chromium and 8% nickel, making it an industry standard for a wide range of applications. Its resistance to oxidation and corrosion, coupled with the fact that it does not readily acquire rust, makes it an ideal choice for use in environments that are susceptible to moisture.

The popularity of 304 stainless steel plates spans across various industries due to their durability and sanitary qualities. In the food and beverage industry, they are preferred for their non-toxic and easy-to-clean surfaces, which are essential for maintaining hygiene standards. Additionally, their aesthetic appeal and resistance to tarnishing make them a favorite in automotive and architectural applications, used in everything from kitchen appliances to decorative facades.

Ferrite Structural Steels Pvt Ltd. stands as a major manufacturer and supplier of 304 stainless steel plates, known for their quality and reliability. Our products meet high industry standards, ensuring that clients receive plates that perform exceptionally well under various conditions. Whether you require robust material for construction or need a hygienic solution for medical or food-related applications, Ferrite Structural Steels offers 304 stainless steel plates that provide outstanding durability and versatility, catering to a broad spectrum of needs.

304 stainless steel plate Specifications

Product Name 304 stainless steel plates
Brand Ferrite Structural Steels Pvt. Ltd.
Minimum Order Quantity 1 Ton
Material Stainless steel
Finish Galvanized, Hot-rolled or Cold-rolled

304 stainless steel plate Size Chart

Plate thickness (mm) Weight (kg/m) kg/meter (width 1200mm) kg/meter (width 1500mm) kg/meter (width 1800mm) kg/meter (width 2400mm)
3 23.55 28.3 35.3 42.4 56.5
4 31.4 37.7 47.1 56.5 75.4
5 39.25 47.1 58.9 70.7 94.2
6 47.1 56.5 70.7 84.8 113
8 62.8 75.4 94.2 113 150.7
10 78.5 94 118 141 188
12 94.2 113 141 170 226
16 125.6 151 188 226 301
20 157 188 236 283 377
22 172.7 207 259 311 415
25 196.25 236 294 353 471
28 219.8 264 330 396 528
32 251.2 301 377 452 603
36 282.6 339 424 509 678
40 314 377 471 565 754
45 353.25 424 530 636 848
50 392.5 471 589 707 942
55 431.75 518 648 777 1036
60 471 565 707 848 1130
65 510 612 765 918 1224
70 549.5 659 824 989 1319
75 588.75 707 883 1060 1413
80 628 754 942 1130 1507
90 706.5 848 1060 1272 1696
100 785 942 1178 1413 1884

 

SS304 Equivalent Grades

Standard Werkstoff Nr. UNS JIS AFNOR BS GOST EN
SS 304 1.4301 S30400 SUS 304 Z7CN18‐09 304S31 08Х18Н10 X5CrNi18-10

 

Chemical Composition of 304 Stainless Steel

Grade C Mn Si P S Cr Mo Ni N
304 min. – – – – – 18 – 8 –
max. 0.1 2 0.8 0.05 0 20 11 0

 

304 Stainless Steel Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304 515 205 40 92 201

Key Features and Benefits

  1. Corrosion Resistance: 304 stainless steel contains chromium, which forms a passive layer of chromium oxide on the surface that shields the steel from rust and other corrosive attacks.
  2. Food Safety: This grade of stainless steel is non-reactive with food, making it ideal for food production, cooking tools, and kitchen appliances.
  3. Heat Resistance: 304 stainless steel withstands high temperatures, which is beneficial for applications involving heat exposure.
  4. Aesthetic Appeal: It offers a high luster finish that remains looking good as new for years, making it suitable for visible architectural and consumer appliance applications.
  5. Formability: 304 stainless steel can be easily formed into various shapes, which is valuable for manufacturing complex components.
  6. Hygienic Properties: Its non-porous surface makes it easy to sterilize, which is why it is commonly used in hospitals and other clean environments.
  7. Low Maintenance: It does not require painting or other surface treatments and is easy to clean, helping reduce upkeep costs.
  8. Longevity: Due to its resistance to corrosion and temperature, 304 stainless steel maintains its integrity over long periods, even in harsh environments.
  9. Recyclability: 304 stainless steel is 100% recyclable, contributing to sustainability and reducing the environmental impact of its use.
  10. Hygiene: The easy-to-clean surface helps maintain sterile conditions, making it a top choice for medical and food-related applications.

Applications of 304 stainless steel plate<

Food Industry

  • Kitchen Equipment: Widely used in the manufacture of kitchen appliances, cookware, and utensils due to its non-reactive properties.
  • Food Processing Equipment: Essential for food processing plants, including worktables, sinks, and other surfaces that come into contact with food, where sanitation and easy cleaning are crucial.

Medical Industry

  • Surgical Instruments: 304 stainless steel is used to make surgical tools and medical equipment that require frequent sterilization.
  • Hospital Infrastructure: Employed in the construction of countertops, cabinets, and other fixtures within hospitals due to its hygienic properties.

Construction and Architecture

  • Architectural Paneling and Trim: Its aesthetic appearance and corrosion resistance make it a popular choice for exterior cladding, paneling, and decorative trim in buildings.
  • Fixtures and Railings: Used in the fabrication of railings, door fixtures, and other architectural details where longevity and appearance are important.

Automotive and Aerospace

  • Automotive Trim: Commonly used in car trims and decorative parts due to its shiny, rust-resistant finish.
  • Aerospace Components: Applied in the production of non-critical parts in the aerospace industry due to its strength and resistance properties.

General Manufacturing

  • Storage Tanks and Containers: 304 stainless steel is used for liquid storage tanks and chemical containers because of its resistance to corrosion.
  • Machine Parts: Suitable for various non-contact parts in machinery, especially in environments where corrosion resistance is a priority.
FAQs — 304 Stainless Steel Plates

304 Stainless Steel Plates: Frequently Asked Questions

Straight answers on sizes, thickness, weight, grades, MTC, pricing and ordering — so your enquiry is specification-ready before you send it.

01
What is 304 stainless steel plate?
304 plate is an austenitic chromium-nickel stainless steel supplied as flat plate for food equipment, tanks, architectural work and general corrosion-resistant fabrication. The grade name alone does not define dimensions, finish, tolerances, delivery condition or inspection. State the complete product standard and purchase specification when requesting a quotation.
02
Which standard should be specified for 304 stainless steel plate?
The purchase order should state ASTM A240/A240M or the project-specified standard, including the applicable edition and any project amendments. Also identify product form, grade designation, dimensions, finish, tolerances, heat treatment, testing and documentation. A grade designation and a dimensional or finish requirement perform different functions and should not be combined or assumed.
03
How does 304 plate compare with 304L plate?
304 and 304L belong to the same grade family, but the carbon limits and potentially applicable requirements differ. The low-carbon designation can be important for welding, while the standard grade may be acceptable for other conditions. Do not substitute either way without comparing the applicable standard, MTC, fabrication route and end-user approval.
04
Is 304 stainless steel plate suitable for general corrosion-resistant service?
It may be considered for general corrosion-resistant service, but suitability depends on the actual temperature, chemicals, chlorides, stress, exposure time, fabrication, surface condition and cleaning. A generic application list is not a material-selection approval. Follow the equipment code, approved drawing and responsible materials or corrosion engineer’s decision.
05
Can 304 stainless steel plate be welded?
304 is commonly fabricated by welding, subject to the approved WPS, suitable consumables, joint design, heat input and cleanliness controls. Prevent carbon-steel contamination and restore the specified surface condition after fabrication. Pressure, high-temperature and safety-critical joints require qualified procedures, personnel and the responsible engineer’s approval.
06
What chemical and mechanical requirements should be checked for 304 plate?
Check the chemistry limits, tensile and yield requirements, elongation, hardness where applicable, heat-treatment condition and thickness-dependent provisions in the governing standard. For elevated-temperature design, room-temperature values alone are insufficient. The MTC and project specification should be reviewed against the ordered thickness and intended service.
07
Can 304 plate replace another stainless steel grade?
Not automatically. Similar appearance or membership of the 300 series does not prove equivalence. Alloy content, carbon limit, corrosion behaviour, temperature capability, mechanical requirements and code acceptance can differ. Submit a documented comparison and proposed MTC for end-user or responsible engineer approval before purchasing or fabrication.
08
Which industries commonly enquire for 304 stainless steel plate?
Enquiries commonly relate to food equipment, tanks, architectural work and general corrosion-resistant fabrication. These examples are purchasing context, not a performance guarantee. Buyers should provide the process environment, design temperature, fabrication drawing, finish, inspection plan and governing code so the requirement can be reviewed against the requested specification.
09
What sizes and thicknesses are available for 304 Stainless Steel Plates?
Size availability should be confirmed for the exact grade, thickness, width, length, finish and quantity. Provide finished dimensions and any cutting allowance separately. A listed size range should not be treated as ready stock, particularly for less common thickness-finish combinations or low-carbon grade variants.
10
How is the weight of 304 Stainless Steel Plates calculated?
Estimated plate weight equals length × width × thickness × material density, with units converted consistently. Austenitic stainless steel is often budgeted using a nominal density close to 8,000 kg/m³, but the grade-specific density and supplier’s confirmed theoretical or actual-weight basis should control purchasing, freight and invoicing.
11
Is a size chart or weight chart available for 304 Stainless Steel Plates?
A size or weight chart can support preliminary budgeting, but it must be checked against the selected grade, density and actual ordered dimensions. For cut pieces, confirm whether the quotation covers theoretical finished weight, actual dispatch weight or gross mother-plate utilisation, including any chargeable offcut.
12
What is the current price per kg of 304 Stainless Steel Plates?
A fixed current price per kg should not be published because stainless-steel values change with alloy surcharge, grade, thickness, finish, quantity, source, testing, processing and freight. Request a dated quotation with complete specifications and delivery postcode. Confirm validity, GST, cutting, packing and transport terms.
13
How is the price per tonne for 304 Stainless Steel Plates determined?
Price per tonne reflects the selected grade, current raw-material market, dimensions, finish, quantity, source, MTC, inspection, cutting, packing and logistics. Provide piece count and total tonnage. Confirm whether billing is based on theoretical or actual weight and whether processing scrap or mother-plate utilisation is included.
14
What is the MOQ for 304 Stainless Steel Plates?
MOQ should be confirmed for the exact grade, thickness, finish, dimensions and quantity. Less common sizes or finishes may have a different commercial minimum. Provide piece quantity and total tonnage at enquiry stage; do not assume the same MOQ applies to every stainless-steel plate variant.
15
Can stock availability of 304 Stainless Steel Plates be confirmed before ordering?
Yes. Availability should be confirmed against the exact grade, standard, thickness, width, length, finish, make preference and quantity. Do not assume every listed size is ready stock. Ask the supplier to identify available material, heat traceability, documentation status and any processing needed before dispatch.
16
Can an MTC be requested with 304 Stainless Steel Plates?
Request the MTC at enquiry stage and specify the required EN 10204 document type or project format. Check the grade, product standard, heat number, chemistry, mechanical results and heat-treatment condition. Documentation must match the offered material before fabrication, tender approval or export dispatch.
17
Can third-party inspection be arranged for 304 Stainless Steel Plates?
Third-party inspection can be reviewed when the agency, inspection and test plan, witness or hold points, acceptance criteria and document format are stated before quotation. Scope, access, charges and schedule must be agreed in the purchase order. Do not assume inspection is included in the base plate price.
18
Can 304 Stainless Steel Plates be cut, drilled or fabricated to a drawing?
Processing requirements can be reviewed against the controlled drawing, grade, thickness, finish, tolerances and quantity. Show finished dimensions, holes, bevels, bends, welds and inspection points. Critical fabrication must follow the approved code, drawing, qualified procedure and responsible engineer’s approval.
19
Does Ferrite supply 304 Stainless Steel Plates in Mumbai, Navi Mumbai and Maharashtra?
Ferrite Structural Steels Pvt Ltd has sales operations in Mumbai and a location in Kalamboli, Navi Mumbai. Buyers in Mumbai, Navi Mumbai, Maharashtra and nearby states should provide the delivery postcode, unloading constraints and required date. Availability, freight and dispatch arrangements must be confirmed for the specified order.
20
Can India-wide and export buyers request quotations for 304 Stainless Steel Plates?
India-wide and export requirements can be reviewed based on specification, quantity and destination. Domestic buyers should provide the delivery postcode. Export enquiries should state destination port, Incoterm, packing, documentation, inspection scope and shipment quantity. Availability and commercial terms must be confirmed before order placement.

Why Choose Ferrite’s 304 stainless steel plate?

Choosing Ferrite Structural Steels Pvt Ltd. for your 304 stainless steel plates ensures you receive products of the highest quality, backed by our dedication to excellence and customer satisfaction. Our 304 stainless steel plates are manufactured using advanced processes, ensuring superior strength, durability, and reliability for a wide range of applications. We offer an extensive selection of sizes and thicknesses to meet your specific needs, all at competitive prices. Whether you’re in construction, automotive, shipbuilding, or any other industry, Ferrite’s 304 stainless steel plates provide the robust performance and longevity you require. Experience the Ferrite difference today—request a quote and let us provide you with the perfect 304 stainless steel plate solution for your project.

Looking for 304 Stainless Steel Plates? Order Now

Send Enquiry