Straight answers on sizes, thickness, weight, grades, MTC, pricing and ordering — so your enquiry is specification-ready before you send it.
01
What is CRS TMT Bar?
CRS TMT Bar are corrosion-resistant TMT reinforcement intended to provide improved durability in aggressive exposure conditions. Procurement must state the complete grade, governing standard, nominal diameter, length, quantity and intended reinforced-concrete use. The commercial name alone does not establish rib geometry, ductility, bend performance, weldability or corrosion-protection requirements.
02
Where are CRS TMT Bar commonly used?
Common uses include coastal, marine, humid, industrial, bridge, flyover and water-related reinforced-concrete work. The bar grade, diameter, spacing, development length, laps, anchorage and concrete cover must follow the approved structural drawings, bar-bending schedule, BOQ, project standard and responsible engineer’s design.
03
Which diameters are listed for CRS TMT Bar?
The live TMT size chart lists 8, 10, 12, 16, 20, 25, 28 and 32 mm. These chart entries do not confirm current stock. State the diameter and quantity for every BOQ line, together with grade, standard, length, make preference and any project-specific rib, ductility or coating requirement.
04
What standard applies to CRS TMT Bar?
Indian TMT reinforcement is commonly specified to IS 1786, but buyers must quote the exact standard edition and complete grade required by the project. Dimensional mass, chemistry, tensile, elongation, bend, rebend and other acceptance requirements should be read from that governing purchase specification.
05
What standard lengths are available for CRS TMT Bar?
The reviewed page does not publish a fixed standard-length range. Availability should be confirmed for the requested diameter, grade and tonnage. State straight length, permissible length tolerance, bundle requirements and whether cut-and-bend schedules or piece identification must be reviewed separately.
06
How is CRS TMT Bar weight per metre calculated?
Theoretical TMT bar weight in kg/m is commonly estimated as nominal diameter squared divided by 162. This is a planning formula, not the final acceptance rule. Actual mass can vary within the applicable standard, so confirm whether quotation and invoicing use theoretical or actual weighment.
07
Can I get a CRS TMT Bar weight chart?
Yes. The live page publishes BIS standard kg/m values and weight ranges for the listed diameters. Use the chart for quantity planning, then apply the approved bar-bending schedule and wastage policy. Confirm the contractual mass tolerance and weighment basis before comparing supplier offers.
08
What is the CRS TMT Bar price per kg?
The price per kg requires a dated quotation and varies with grade, diameter mix, tonnage, make, length, coating or corrosion-resistant requirement, testing, freight and taxes. Send the complete BOQ and delivery location so suppliers quote the same technical and commercial scope.
09
How is the CRS TMT Bar price per tonne determined?
Price per tonne depends on exact grade and standard, diameter-wise quantities, total tonnage, mill or make preference, MTC, inspection, coating scope, packing and destination. Confirm whether freight, unloading, testing and GST are included and check the quotation’s validity and weighment basis.
10
What is the MOQ for CRS TMT Bar?
The live page states a minimum order quantity of 1 tonne. Actual acceptance remains subject to diameter, grade, coating or CRS requirement and availability. For mixed-diameter orders, provide the weight or piece count of each line instead of only the combined project tonnage.
11
Is CRS TMT Bar available from ready stock?
Stock must be confirmed for the exact grade, standard, diameter, length, make and quantity. A product page or weight chart does not establish immediate availability. State MTC, inspection, coating, bundling and required delivery-date conditions at the enquiry stage.
12
Can an MTC be supplied with CRS TMT Bar?
Request the mill test certificate at enquiry stage and specify the required document type. It should identify the heat or batch, complete grade, standard and reported chemistry and mechanical-test results. Bar markings, bundle tags and traceability expectations should be agreed before ordering.
13
How should corrosion resistance be specified for CRS TMT bar?
Do not rely on the letters CRS alone. State the base TMT grade, governing standard, required chemistry or corrosion-performance criteria, exposure class, test method and MTC. Crs is not corrosion-proof; the approved durability design must also address cover, concrete quality, cracking, drainage and exposure; final durability selection belongs to the responsible engineer.
14
Can CRS TMT Bar be cut, bent, rebent or welded?
Cutting and bending must follow the approved bar-bending schedule, minimum bend diameter and site procedure. Re-bending or welding should not be assumed acceptable for every grade or diameter. Obtain the structural engineer’s approval and follow the governing code, material standard and qualified welding procedure.
15
Can another TMT grade replace CRS TMT Bar?
No grade substitution should be made from yield strength alone. Strength, ductility class, elongation, tensile-to-yield ratio, chemistry, weldability, bend performance, detailing and design assumptions must be compared. Written approval from the structural engineer and end user is required before supply.
16
Can I buy CRS TMT Bar from a supplier in Mumbai or Navi Mumbai?
Ferrite lists its head office in Mumbai and a facility address at Kalamboli, Navi Mumbai. Provide the delivery postcode, diameter-wise tonnage, longest length, vehicle and unloading constraints and required date so supply logistics can be reviewed for Mumbai, Navi Mumbai and Maharashtra.
17
Can CRS TMT Bar be supplied across India?
The website states nationwide supply. India-wide enquiries should include consignee postcode, grade, diameter-wise tonnage, bar length, bundling, MTC and delivery schedule. Freight and unloading can materially affect landed price, so compare offers on the same ex-works or delivered basis.
18
Does Ferrite handle export enquiries for CRS TMT Bar?
Export requirements can be reviewed against the requested specification and quantity. Provide destination port and country, Incoterm, grade, standard, diameter mix, length, tonnage, coating, packing, MTC and inspection requirements. Shipping programme and documentation must be confirmed for the specific order.
19
How should quotations from CRS TMT Bar suppliers be compared?
Compare complete grade and standard, diameter-wise quantity, mass tolerance, length, make or mill, MTC, inspection, coating scope, packing, freight, taxes and delivery basis. A lower rate is not comparable if the offered ductility class, corrosion protection, certification or weighment method differs.
20
What details are needed for a fast CRS TMT Bar quotation?
Send product name, complete grade and standard, diameter-wise quantity, straight length or bar-bending schedule and total tonnage. Add make preference, MTC, inspection, coating requirement, delivery postcode or destination port, Incoterm, unloading constraints and required delivery date.
