Straight answers on sizes, thickness, weight, grades, MTC, pricing and ordering — so your enquiry is specification-ready before you send it.
01
What is an IPE beam?
IPE Beams refers to European I-sections with relatively narrow parallel flanges. It is used in building frames, industrial structures, platforms, mezzanines and engineered support systems. The name identifies a profile family, not a safe load rating; final selection must follow the approved drawing, BOQ, project standard and responsible engineer’s calculations.
02
What do the numbers in IPE 80, IPE 200 or IPE 300 mean?
No substitution or structural selection should be made from profile name, span, flange width or unit weight alone. Capacity depends on loads, combinations, span, orientation, lateral restraint, buckling, deflection, connections, fire requirements and the design code. Any change from IPE Beams requires revised calculations and written approval.
03
Which IPE beam sizes and weights are shown in the size chart?
The live page shows IPE 80 to IPE 300 in the published chart, with 6.0 kg/m to 42.2 kg/m in the published chart. These are catalogue values rather than confirmation of ready stock. Quote the exact section designation, dimensional standard, material grade, length and quantity, and verify the selected row against the approved project documents.
04
How is an IPE beam different from an IPEA or IPEO beam?
IPE Beams has its own dimensional and mass series. A similar nominal depth in another family can have different flange width, thickness, radii, mass and section properties. Compare recognised section tables and approved calculations; never treat related profile names as automatic equivalents.
05
How is an IPE beam different from an HEA or HEB beam?
IPE Beams has its own dimensional and mass series. A similar nominal depth in another family can have different flange width, thickness, radii, mass and section properties. Compare recognised section tables and approved calculations; never treat related profile names as automatic equivalents.
06
What do flange thickness and web thickness mean for IPE beams?
Depth and flange width define the main outline; web and flange thickness define material distribution; root radius describes the web-to-flange curve. Section area represents cross-sectional material, while section modulus is a geometric property used in design. None is a stand-alone safe load rating.
07
Can IPE beam weight per metre be used to calculate order tonnage?
Theoretical order weight equals published kg/m × ordered length in metres × number of pieces. Calculate separate line items for each designation and length. Confirm whether the quotation, freight and invoice use theoretical or actual weight, and include only approved cutting allowances.
08
Can an IPE section be selected from span alone?
No substitution or structural selection should be made from profile name, span, flange width or unit weight alone. Capacity depends on loads, combinations, span, orientation, lateral restraint, buckling, deflection, connections, fire requirements and the design code. Any change from IPE Beams requires revised calculations and written approval.
09
How is the IPE Beams price per kg calculated?
Do not publish a fixed current IPE Beams price per kg. The rate changes with steel grade, section mass, quantity, length, finish, market date and supply route. Send the exact designation, standard, total tonnage and delivery postcode for a dated quotation, then confirm GST, freight and fabrication inclusions.
10
Can a bulk IPE Beams supplier quote a dated tonne rate?
A current IPE Beams price per tonne can be quoted for a defined requirement. State the exact section, material grade and standard, length, pieces or tonnage, finish, MTC, inspection and destination. Compare offers on the same weight basis and verify tax, freight, cutting, packing and documentation terms.
11
Why may two IPE Beams supplier quotations differ?
The landed cost of IPE Beams depends on grade, section availability, unit mass, order mix, total tonnage, length, cutting, drilling, coating, testing, inspection, packing and transport. An uncommon designation or mixed small quantities may price differently from one repetitive bulk section.
12
How is the minimum order quantity confirmed for IPE Beams?
The live page states a minimum order quantity of 1 tonne. Confirm how MOQ applies when the enquiry mixes sections, grades, special lengths, finishes or inspection requirements. Provide the piece count and calculated tonnage for every line item so commercial feasibility can be reviewed accurately.
13
How should current IPE Beams stock availability be checked?
Do not assume every IPE Beams designation, grade and length is ready stock. Availability should be confirmed against the exact specification, quantity and enquiry date. If timing matters, state the required date and ask whether the quotation is based on stock, incoming material or a reviewed supply requirement.
14
Can heat traceability and an MTC be requested for IPE Beams?
Request the MTC for IPE Beams at the enquiry stage, stating certificate type, grade standard, heat traceability and project format. Check that the certificate matches the supplied markings, dimensions and product form. A generic document does not establish compliance with every structural, toughness or coating requirement.
15
What should third-party inspection cover for IPE Beams?
Inspection for IPE Beams should cover identification, dimensions, web and flange thickness, length, straightness, surface condition, quantity, marking and MTC traceability. For third-party inspection, specify the agency, stage, hold points, acceptance criteria and required reports before ordering.
16
Can fabrication drawings be included with a IPE Beams enquiry?
Cutting, drilling or fabrication of IPE Beams can be reviewed against an approved drawing. Provide cut lengths, hole centres, copes, notches, end plates, weld details, tolerances and piece marks. Connection design, welding procedures and any structural modification remain subject to engineer and fabricator approval.
17
Should hot-rolled or galvanised finish be stated for IPE Beams?
The live page lists hot-rolled, galvanised or customer-specified for IPE Beams. State the required surface condition, coating or galvanising standard, preparation, appearance and inspection. Coating suitability depends on the base material, fabrication sequence and exposure, and galvanised steel is corrosion-resistant rather than permanently rust-proof.
18
Which industries procure IPE Beams?
IPE Beams are considered for building frames, industrial structures, platforms, mezzanines and engineered support systems. Suitability depends on the exact section properties, material grade, exposure, span, restraints, loads, connections and fire requirements. Final use must follow approved calculations, drawings, BOQ and applicable project standards.
19
Does Ferrite review India-wide and export enquiries for IPE Beams?
Ferrite can review IPE Beams requirements for Mumbai, Navi Mumbai, Maharashtra, nearby states, India-wide supply and export enquiries. Availability and logistics depend on section and quantity. Provide the delivery postcode or destination port, Incoterm, unloading constraints and required date for review.
20
Which information prevents delay in a IPE Beams quotation?
For a fast IPE Beams quotation, send the profile and exact designation, dimensions, material grade, material and dimensional standards, length, pieces, tonnage, finish, make preference, MTC and inspection requirements. Add fabrication drawings, delivery postcode or port, Incoterm and required date where applicable.
