Straight answers on sizes, thickness, weight, grades, MTC, pricing and ordering — so your enquiry is specification-ready before you send it.
01
What is an IPEO beam?
IPEO Beams refers to an optimised IPE-family profile with its own web, flange and mass values. It is used in commercial, industrial, infrastructure and architectural structures where an IPEO section is approved. The name identifies a profile family, not a safe load rating; final selection must follow the approved drawing, BOQ, project standard and responsible engineer’s calculations.
02
What does the O designation mean in an IPEO profile?
The designation identifies a geometry within the IPEO Beams family; it is not a material grade, strength class or load rating. Read it only with the applicable dimensional table and project standard, then confirm depth, flange width, web and flange thickness, root radius where relevant, and unit mass.
03
Which IPEO beam sizes and weights are shown on the page?
The live page shows IPE O 180 to IPE O 550 in the published chart, with 27.1 kg/m to 156 kg/m in the published chart. These are catalogue values rather than confirmation of ready stock. Quote the exact section designation, dimensional standard, material grade, length and quantity, and verify the selected row against the approved project documents.
04
How is IPEO different from standard IPE and IPEA?
IPEO Beams has its own dimensional and mass series. A similar nominal depth in another family can have different flange width, thickness, radii, mass and section properties. Compare recognised section tables and approved calculations; never treat related profile names as automatic equivalents.
05
What do root radius and sectional area mean in the IPEO chart?
Depth and flange width define the main outline; web and flange thickness define material distribution; root radius describes the web-to-flange curve. Section area represents cross-sectional material, while section modulus is a geometric property used in design. None is a stand-alone safe load rating.
06
Can IPEO be selected only because it has a favourable weight-to-strength ratio?
No substitution or structural selection should be made from profile name, span, flange width or unit weight alone. Capacity depends on loads, combinations, span, orientation, lateral restraint, buckling, deflection, connections, fire requirements and the design code. Any change from IPEO Beams requires revised calculations and written approval.
07
How should an IPEO designation be written in a purchase order?
State the full IPEO Beams designation, dimensional standard, material grade and grade standard, length, piece quantity or tonnage, finish, MTC, inspection and drawing reference. Depth or flange width alone is insufficient because similar headline dimensions can have different thicknesses, radii, mass and section properties.
08
How is total IPEO tonnage estimated from kg/m?
Theoretical order weight equals published kg/m × ordered length in metres × number of pieces. Calculate separate line items for each designation and length. Confirm whether the quotation, freight and invoice use theoretical or actual weight, and include only approved cutting allowances.
09
What is the IPEO Beams price per kg?
Do not publish a fixed current IPEO Beams price per kg. The rate changes with steel grade, section mass, quantity, length, finish, market date and supply route. Send the exact designation, standard, total tonnage and delivery postcode for a dated quotation, then confirm GST, freight and fabrication inclusions.
10
Can I obtain a current IPEO Beams price per tonne?
A current IPEO Beams price per tonne can be quoted for a defined requirement. State the exact section, material grade and standard, length, pieces or tonnage, finish, MTC, inspection and destination. Compare offers on the same weight basis and verify tax, freight, cutting, packing and documentation terms.
11
What factors affect the landed cost of IPEO Beams?
The landed cost of IPEO Beams depends on grade, section availability, unit mass, order mix, total tonnage, length, cutting, drilling, coating, testing, inspection, packing and transport. An uncommon designation or mixed small quantities may price differently from one repetitive bulk section.
12
What is the MOQ for IPEO Beams?
The live page states a minimum order quantity of 1 tonne. Confirm how MOQ applies when the enquiry mixes sections, grades, special lengths, finishes or inspection requirements. Provide the piece count and calculated tonnage for every line item so commercial feasibility can be reviewed accurately.
13
Are all IPEO Beams sizes available from ready stock?
Do not assume every IPEO Beams designation, grade and length is ready stock. Availability should be confirmed against the exact specification, quantity and enquiry date. If timing matters, state the required date and ask whether the quotation is based on stock, incoming material or a reviewed supply requirement.
14
Can IPEO Beams be supplied with an MTC?
Request the MTC for IPEO Beams at the enquiry stage, stating certificate type, grade standard, heat traceability and project format. Check that the certificate matches the supplied markings, dimensions and product form. A generic document does not establish compliance with every structural, toughness or coating requirement.
15
What inspection and documents should be specified for IPEO Beams?
Inspection for IPEO Beams should cover identification, dimensions, web and flange thickness, length, straightness, surface condition, quantity, marking and MTC traceability. For third-party inspection, specify the agency, stage, hold points, acceptance criteria and required reports before ordering.
16
Can IPEO Beams be cut, drilled or fabricated to a drawing?
Cutting, drilling or fabrication of IPEO Beams can be reviewed against an approved drawing. Provide cut lengths, hole centres, copes, notches, end plates, weld details, tolerances and piece marks. Connection design, welding procedures and any structural modification remain subject to engineer and fabricator approval.
17
Which finish options can be reviewed for IPEO Beams?
The live page lists hot-rolled, galvanised or customer-specified for IPEO Beams. State the required surface condition, coating or galvanising standard, preparation, appearance and inspection. Coating suitability depends on the base material, fabrication sequence and exposure, and galvanised steel is corrosion-resistant rather than permanently rust-proof.
18
Where are IPEO Beams commonly used?
IPEO Beams are considered for commercial, industrial, infrastructure and architectural structures where an IPEO section is approved. Suitability depends on the exact section properties, material grade, exposure, span, restraints, loads, connections and fire requirements. Final use must follow approved calculations, drawings, BOQ and applicable project standards.
19
Can Ferrite supply IPEO Beams in Mumbai, Navi Mumbai and Maharashtra?
Ferrite can review IPEO Beams requirements for Mumbai, Navi Mumbai, Maharashtra, nearby states, India-wide supply and export enquiries. Availability and logistics depend on section and quantity. Provide the delivery postcode or destination port, Incoterm, unloading constraints and required date for review.
20
What details are needed for a fast IPEO Beams quotation?
For a fast IPEO Beams quotation, send the profile and exact designation, dimensions, material grade, material and dimensional standards, length, pieces, tonnage, finish, make preference, MTC and inspection requirements. Add fabrication drawings, delivery postcode or port, Incoterm and required date where applicable.
