Straight answers on sizes, thickness, weight, grades, MTC, pricing and ordering — so your enquiry is specification-ready before you send it.
01
What does IS 2062 E250 mean for a beam?
IS 2062 E250 Beams refers to an Indian structural-steel grade family whose exact subgrade and thickness requirements must be stated. It is used in buildings, industrial frames, bridges, flyovers and general Indian structural fabrication. For structural work, the exact section, material grade, standard and connection detail must follow the approved drawings and calculations; a product-family name does not establish a safe load.
02
What does the E250 strength designation indicate?
The numeric part of IS 2062 E250 indicates a nominal strength class under IS 2062, subject to the standard’s thickness and product-form rules. It is not a guaranteed design capacity for the beam. The engineer must use the applicable code, MTC values and approved section properties.
03
Why must the E250 subgrade be stated?
The exact E250 subgrade controls additional requirements such as impact testing and deoxidation provisions. Confirm the complete designation, thickness range, product standard and test requirement on the purchase order and MTC. Do not shorten the grade in a way that removes the quality or toughness designation.
04
Which impact-test condition must be verified for the selected E250 subgrade?
The relevant impact-test condition is the temperature specified by the selected IS 2062 subgrade and project requirement. Impact toughness must be verified through the governing standard and the MTC for the supplied thickness and heat. Do not assume a toughness value from the base strength class when the full subgrade has not been stated.
05
Do E250 mechanical requirements change with thickness?
Yes, the required yield, tensile and sometimes impact properties for IS 2062 E250 can vary with thickness and subgrade under IS 2062. Procurement should not publish or design from one headline value. Verify the ordered thickness range, complete grade and applicable MTC values against the project standard.
06
Which standard and complete designation should be stated for E250 beams?
The material should be ordered to IS 2062 with the complete designation IS 2062 E250 and required subgrade or quality suffix. Separately state the beam dimensional standard, section designation, length and tolerance standard. This prevents a material-grade name from being mistaken for a beam size standard.
07
Can S275, ASTM A36 or another grade replace E250 without approval?
No grade described as “equivalent” should replace IS 2062 E250 automatically. Compare chemistry, yield and tensile requirements, toughness, thickness limits, delivery condition, weldability and product standard. Written approval from the engineer, consultant or end user is required before substitution.
08
What sizes are listed for IS 2062 E250 beams?
The page lists 75 x 40 mm to 400 x 100 mm and 3 mm to 25 mm for IS 2062 E250 Beams. Not every size necessarily applies to every grade, length, finish or quantity. Confirm the full section designation and current availability, and use the approved section table for weight and properties.
09
What is the IS 2062 E250 Beams price per kg?
A fixed current IS 2062 E250 Beams price per kg should not be published because steel input cost, grade, section mass, quantity, length, finish and market date change. Provide the exact section, standard, total tonnage and delivery postcode for a dated quotation, and confirm GST, freight and fabrication inclusions.
10
Can I obtain a current IS 2062 E250 Beams price per tonne?
Yes, IS 2062 E250 Beams can be requested on a dated per-tonne basis for a defined specification. State the section, grade, standards, length, quantity, finish, MTC, inspection and destination. Compare quotations on the same weight basis, tax, freight, cutting and documentation terms.
11
Which factors change the cost of IS 2062 E250 Beams?
The landed cost of IS 2062 E250 Beams depends on base steel price, grade, unit mass, size availability, order mix, length, cutting, drilling, finish, testing, inspection, packing and transport. Mixed or uncommon sections may have different conversion and logistics costs from a repetitive bulk order.
12
What is the MOQ for IS 2062 E250 Beams?
The page states an MOQ of 1 tonne. MOQ should still be confirmed where the order mixes sizes, asks for uncommon sections, special lengths, coatings, third-party inspection or export packing. Send the piece count and tonnage for every line item.
13
Is every IS 2062 E250 Beams section available from stock?
Do not assume every IS 2062 E250 Beams section, grade and length is ready stock. Availability must be checked against the exact specification, quantity and enquiry date. If the programme is critical, state the required delivery date and ask the quotation to identify the stock, mill or production basis.
14
Can IS 2062 E250 Beams be supplied with an MTC?
An MTC requirement for IS 2062 E250 Beams should be stated before ordering. Specify certificate type, heat or batch traceability, grade standard, subgrade and any project format. Check that the certificate relates to the supplied markings and ordered thickness; a generic document does not prove project compliance.
15
What inspection should be specified for IS 2062 E250 Beams?
Inspection for IS 2062 E250 Beams should verify identification, section dimensions, web and flange thickness, length, straightness, surface condition, quantity, marking and MTC traceability. If third-party inspection is required, state the agency, inspection stage, hold points, acceptance criteria and required reports in the enquiry.
16
Can IS 2062 E250 Beams be cut, drilled or fabricated?
Cutting, drilling or fabrication for IS 2062 E250 Beams can be reviewed from an approved drawing. Provide cut lengths, hole diameters and centres, copes, notches, end plates, weld details, tolerances and piece marks. Structural connections and welding procedures remain subject to engineer and fabricator approval.
17
What finish or corrosion-protection options can be reviewed?
The live page refers to hot-rolled, galvanised or customer-specified finishes for IS 2062 E250 Beams. State the required surface preparation, paint or galvanising standard, coating inspection and cut-edge repair. Coating does not replace corrosion design, drainage, maintenance or fire-protection requirements.
18
Which applications commonly use IS 2062 E250 Beams?
IS 2062 E250 Beams is considered for buildings, industrial frames, bridges, flyovers and general Indian structural fabrication. Suitability depends on section properties, grade, span, restraints, loading, connections, exposure and fire requirements. For any load-bearing use, the final section and grade must follow approved calculations, drawings, BOQ and project standards.
19
Can Ferrite supply IS 2062 E250 Beams in Mumbai, Navi Mumbai and Maharashtra?
Ferrite can review IS 2062 E250 Beams enquiries for Mumbai, Navi Mumbai, Maharashtra, nearby states, India-wide supply and export requirements. Availability and logistics depend on the exact size and quantity. Provide the delivery postcode or destination port, unloading constraints, Incoterm and required date.
20
What information is needed for a fast IS 2062 E250 Beams quotation?
For a fast IS 2062 E250 Beams quotation, send the section designation, profile, dimensions, unit mass if specified, grade, standards, length, pieces, tonnage, finish, make preference, MTC and inspection requirements. Add fabrication drawings, delivery postcode or port, Incoterm and required date where applicable.
