Straight answers on sizes, thickness, weight, grades, MTC, pricing and ordering — so your enquiry is specification-ready before you send it.
01
What does IS 1852 cover for rolled steel beams?
IS 1852 Beams refers to rolling and cutting tolerance requirements rather than a steel grade. It is used in projects requiring stated rolling and cutting tolerances for hot-rolled steel products. For structural work, the exact section, material grade, standard and connection detail must follow the approved drawings and calculations; a product-family name does not establish a safe load.
02
Is IS 1852 a chemical or mechanical grade specification?
IS 1852 is not, by itself, a material grade. It addresses dimensional, sectional or tolerance requirements relevant to the named product. The purchase order must separately state the steel grade and grade standard so chemistry, strength, toughness and weldability requirements are unambiguous.
03
How does IS 1852 differ from IS 808?
IS 1852 addresses rolling and cutting tolerances, whereas IS 808 addresses dimensions and sectional properties for hot-rolled structural sections. They perform different procurement functions. State the material grade separately and use the exact standards and editions required by the project documents.
04
How does IS 1852 relate to the beam material grade?
IS 1852 works alongside, not instead of, the material-grade standard. The dimensional or tolerance document controls geometry-related acceptance, while the grade standard controls chemistry and mechanical requirements. Both should be identified where the project specification requires them.
05
What sizes and thicknesses are listed for IS 1852 beams?
The stated page range is 75 x 40 mm to 400 x 100 mm, with thickness listed as 3 mm to 25 mm. The exact section must be verified against the applicable IS 1852 table and project edition. Section availability, mass and tolerances should be confirmed for the ordered designation.
06
Which rolling tolerances should be stated in the PO?
State the exact IS 1852 requirement, applicable edition, section designation and the dimensional items to be inspected. Also state the material grade, because IS 1852 does not by itself confirm chemistry or strength. Acceptance criteria should match the approved project specification.
07
Can an equivalent-grade table replace IS 1852 tolerance compliance?
No. An equivalent-grade table concerns material cross-references and cannot prove compliance with IS 1852 dimensional or tolerance requirements. Verify the delivered section geometry and permissible deviations against the specified standard, while checking the material grade separately through the MTC.
08
What dimensional items should be inspected under an IS 1852 requirement?
Check section depth, flange width, web and flange thickness, root radius, unit mass, sectional area and relevant section properties shown by the specified IS 1852 table. Also verify tolerances and edition. Do not calculate structural capacity from a sales-page size list.
09
What is the IS 1852 Beams price per kg?
A fixed current IS 1852 Beams price per kg should not be published because steel input cost, grade, section mass, quantity, length, finish and market date change. Provide the exact section, standard, total tonnage and delivery postcode for a dated quotation, and confirm GST, freight and fabrication inclusions.
10
Can I obtain a current IS 1852 Beams price per tonne?
Yes, IS 1852 Beams can be requested on a dated per-tonne basis for a defined specification. State the section, grade, standards, length, quantity, finish, MTC, inspection and destination. Compare quotations on the same weight basis, tax, freight, cutting and documentation terms.
11
Which factors change the cost of IS 1852 Beams?
The landed cost of IS 1852 Beams depends on base steel price, grade, unit mass, size availability, order mix, length, cutting, drilling, finish, testing, inspection, packing and transport. Mixed or uncommon sections may have different conversion and logistics costs from a repetitive bulk order.
12
What is the MOQ for IS 1852 Beams?
The page states an MOQ of 1 tonne. MOQ should still be confirmed where the order mixes sizes, asks for uncommon sections, special lengths, coatings, third-party inspection or export packing. Send the piece count and tonnage for every line item.
13
Is every IS 1852 Beams section available from stock?
Do not assume every IS 1852 Beams section, grade and length is ready stock. Availability must be checked against the exact specification, quantity and enquiry date. If the programme is critical, state the required delivery date and ask the quotation to identify the stock, mill or production basis.
14
Can IS 1852 Beams be supplied with an MTC?
An MTC requirement for IS 1852 Beams should be stated before ordering. Specify certificate type, heat or batch traceability, grade standard, subgrade and any project format. Check that the certificate relates to the supplied markings and ordered thickness; a generic document does not prove project compliance.
15
What inspection should be specified for IS 1852 Beams?
Inspection for IS 1852 Beams should verify identification, section dimensions, web and flange thickness, length, straightness, surface condition, quantity, marking and MTC traceability. If third-party inspection is required, state the agency, inspection stage, hold points, acceptance criteria and required reports in the enquiry.
16
Can IS 1852 Beams be cut, drilled or fabricated?
Cutting, drilling or fabrication for IS 1852 Beams can be reviewed from an approved drawing. Provide cut lengths, hole diameters and centres, copes, notches, end plates, weld details, tolerances and piece marks. Structural connections and welding procedures remain subject to engineer and fabricator approval.
17
What finish or corrosion-protection options can be reviewed?
The live page refers to hot-rolled, galvanised or customer-specified finishes for IS 1852 Beams. State the required surface preparation, paint or galvanising standard, coating inspection and cut-edge repair. Coating does not replace corrosion design, drainage, maintenance or fire-protection requirements.
18
Which applications commonly use IS 1852 Beams?
IS 1852 Beams is considered for projects requiring stated rolling and cutting tolerances for hot-rolled steel products. Suitability depends on section properties, grade, span, restraints, loading, connections, exposure and fire requirements. For any load-bearing use, the final section and grade must follow approved calculations, drawings, BOQ and project standards.
19
Can Ferrite supply IS 1852 Beams in Mumbai, Navi Mumbai and Maharashtra?
Ferrite can review IS 1852 Beams enquiries for Mumbai, Navi Mumbai, Maharashtra, nearby states, India-wide supply and export requirements. Availability and logistics depend on the exact size and quantity. Provide the delivery postcode or destination port, unloading constraints, Incoterm and required date.
20
What information is needed for a fast IS 1852 Beams quotation?
For a fast IS 1852 Beams quotation, send the section designation, profile, dimensions, unit mass if specified, grade, standards, length, pieces, tonnage, finish, make preference, MTC and inspection requirements. Add fabrication drawings, delivery postcode or port, Incoterm and required date where applicable.
