Straight answers on sizes, thickness, weight, grades, MTC, pricing and ordering ā so your enquiry is specification-ready before you send it.
01
What is SS 304L Flat Bar?
SS 304L Flat Bar is a low-carbon austenitic stainless-steel flat bar related to grade 304. The lower carbon limit helps reduce sensitisation risk during welding; it does not make 304L universally more corrosion-resistant than every other grade. Buyers should specify the complete grade, width, thickness, length, finish, quantity and governing standard so the offered material can be checked against the actual service requirement.
02
Which applications commonly use SS 304L Flat Bar?
Common applications include welded food-processing, pharmaceutical, chemical, architectural and general fabricated equipment. Suitability depends on temperature, chemicals, chlorides, cleaning regime, fabrication method and structural design. Final selection must follow the approved drawing, BOQ, material specification and responsible engineer or end userās approval.
03
What sizes are listed for SS 304L Flat Bar?
The live page lists 10 x 10, 12 x 12, 14 x 14, 16 x 16, 17 x 17, 20 x 20, 25 x 25, 32 x 32, 40 x 40, 42 x 42, 50 x 50, 53 x 53, 56 x 56 and 63 x 63 mm. These are published chart entries, not confirmation of immediate stock. State the required width x thickness, length, grade, finish and tonnage, especially when the drawing calls for a size outside the published chart.
04
How should the dimensions of SS 304L Flat Bar be specified?
Specify width x thickness x length in millimetres and add the piece quantity. Do not send only a single āsizeā. Where dimensional control matters, also state width and thickness tolerances, straightness, edge condition, surface acceptance and whether the dimensions are before or after machining or finishing.
05
What standard lengths are available for SS 304L Flat Bar?
The reviewed page does not publish a fixed standard-length range. Confirm availability for the requested size, grade and quantity. State exact or random length, permissible length tolerance, cut-length schedule, end condition and whether individual pieces need identification against the fabrication drawing.
06
How is SS 304L Flat Bar weight per metre calculated?
Theoretical weight is calculated from width, thickness and the density adopted for 304L stainless steel. Do not automatically use the mild-steel factor for a contractual stainless-steel weight. Ask the supplier to state the density or weight-chart basis and allow for dimensional tolerances, actual length and invoicing method.
07
Can Ferrite provide a SS 304L Flat Bar weight chart?
The live page provides average kg/m and kg/ft values for its listed sizes. Use them for preliminary estimation only and confirm that the density basis is appropriate for 304L stainless steel. Final purchase quantity should consider actual dimensions, permitted tolerances, cut lengths and the agreed commercial weight basis.
08
What is the SS 304L Flat Bar price per kg?
The price per kg requires a dated quotation. It varies with stainless-steel alloy cost, grade, size, quantity, finish, tolerance, cutting, testing, packing, freight and taxes. Send a complete line-item specification so suppliers quote the same material and commercial scope.
09
How is the SS 304L Flat Bar price per tonne determined?
Price per tonne depends on the exact 304L stainless steel specification, section size, length, total tonnage, surface finish, certification, inspection and destination. Ask whether cutting, packing, freight, GST and testing are included and check the quotation validity before comparing offers.
10
What is the MOQ for SS 304L Flat Bar?
The live page states a minimum order quantity of 1 tonne. Actual acceptance is subject to size, grade, finish and availability. For mixed-size enquiries, provide the individual weight or piece quantity for every line item rather than only the overall project tonnage.
11
Is SS 304L Flat Bar available from ready stock?
Availability must be confirmed for the exact grade, size, length, finish and quantity. A live product page or size chart does not establish ready stock. Include any mill or make preference, MTC requirement, inspection plan and delivery date because these conditions may affect sourcing.
12
Can an MTC be supplied with SS 304L Flat Bar?
Request the mill test certificate at the enquiry stage and state the required certificate format. It should identify the supplied material, heat or batch and applicable grade or standard, with reported chemistry and mechanical results where required. Traceability and third-party review must be agreed before order placement.
13
What does the āLā mean in SS 304L Flat Bar?
The āLā identifies a lower-carbon version of the related grade, mainly relevant to sensitisation and welding. It does not mean ālow strengthā or guarantee suitability for every corrosive or high-temperature environment. Verify the carbon limit, product standard, delivery condition and MTC before accepting the material.
14
Can SS 304L Flat Bar be cut, drilled, welded or fabricated?
Cutting, drilling and fabrication can be reviewed against the drawing and quantity. Provide dimensions, hole pattern, edge preparation, weld procedure requirements, permissible tolerances and finish restoration needs. Welding consumables, heat input and post-fabrication cleaning should follow the approved procedure for 304L stainless steel.
15
Is SS 304L Flat Bar suitable for outdoor, coastal or marine use?
Suitability depends on the grade and severity of exposure. Stainless steel is corrosion-resistant, not corrosion-proof. Chlorides, crevices, deposits, temperature and maintenance can cause localised attack. Coastal or marine selection requires project-specific review; 316 is often considered over 304, but final approval remains essential.
16
Can I buy SS 304L Flat Bar from a supplier in Mumbai or Navi Mumbai?
Ferrite lists its head office in Mumbai and a facility address at Kalamboli, Navi Mumbai. Buyers should provide the delivery postcode, vehicle or unloading constraints, size-wise quantity and required date so availability and logistics can be reviewed for Mumbai, Navi Mumbai or Maharashtra.
17
Can SS 304L Flat Bar be supplied across India?
The website states nationwide supply. India-wide enquiries should include the consignee postcode, total tonnage, longest bar length, packing requirement and delivery schedule. Compare quotations on the same ex-works or delivered basis because long-product freight can materially change the landed price.
18
Does Ferrite handle export enquiries for SS 304L Flat Bar?
Export requirements can be reviewed for the requested specification and quantity. Provide destination country and port, Incoterm, grade, standard, size, length, tonnage, finish, packing, MTC and inspection needs. Shipping programme and documentation should be confirmed for the specific order.
19
How should quotations from SS 304L Flat Bar suppliers be compared?
Compare the exact grade and standard, dimensions, tolerance, length, finish, certification, origin or make if specified, inspection, packing, freight, taxes and delivery basis. Do not treat an alternative grade or different surface finish as equivalent merely because its basic rate is lower.
20
What details are required for a fast SS 304L Flat Bar quotation?
Send product name, complete grade and standard, width x thickness, length, piece quantity and total tonnage. Add finish, tolerance, make preference, MTC, third-party inspection, cutting drawing, delivery postcode or destination port, Incoterm and required delivery date. Include the BOQ reference where applicable.
