Straight answers on sizes, thickness, weight, grades, MTC, pricing and ordering — so your enquiry is specification-ready before you send it.
01
What does “structural beam” mean in a steel enquiry?
Structural Beams refers to a broad procurement description that must be converted into an exact section and grade. It is used in commercial and residential frames, industrial buildings, infrastructure and equipment platforms. For structural work, the exact section, material grade, standard and connection detail must follow the approved drawings and calculations; a product-family name does not establish a safe load.
02
Which beam profiles can fall under structural beams?
Select the beam family from the structural design, not from appearance or price alone. The engineer should compare section properties, orientation, span, restraints, connection geometry, serviceability and fire or corrosion requirements. Procurement should then order the exact designation shown on the approved BOQ.
03
How should a buyer choose between beam sections?
Structural Beams must be compared using the actual geometry and section properties, not only the familiar “I” or “H” label. Flange width, flange thickness, web thickness, root radius and unit mass influence behaviour. The approved section designation and orientation must control procurement.
04
What structural beam sizes are shown on the page?
The live page lists 75 x 40 mm to 400 x 100 mm for Structural Beams. Treat this as a catalogue range rather than proof that every combination is ready stock. Send the exact designation, grade, length and quantity so the required section can be checked against the applicable table and current availability.
05
What thickness range is stated for structural beams?
The page states a thickness range of 3 mm to 25 mm. Web and flange thicknesses are not always the same, and a nominal section designation does not replace a full section table. Confirm the exact geometry and permissible tolerances before fabrication drawings are released.
06
Why must the BOQ include a section designation?
Write the complete section designation used by the governing table, plus material grade, standard, length, quantity and finish. Avoid ordering only by overall depth and flange width because sections with similar headline dimensions can have different web, flange, radius, mass and properties.
07
How is structural beam weight per metre checked?
Published weight per metre is a section-identification and quantity-estimation aid. Confirm it for the exact section table and standard. Total theoretical weight equals unit mass multiplied by ordered length and piece count; commercial settlement may use actual or theoretical weight as expressly stated in the quotation.
08
Can a structural beam supplier approve the final section size?
No supplier should issue a structural load recommendation without design inputs and calculations. Safe capacity depends on section properties, span, support and restraint conditions, load combinations, buckling, deflection, connections, fire design and code requirements. The responsible engineer must approve the final section.
09
What is the Structural Beams price per kg?
A fixed current Structural Beams price per kg should not be published because steel input cost, grade, section mass, quantity, length, finish and market date change. Provide the exact section, standard, total tonnage and delivery postcode for a dated quotation, and confirm GST, freight and fabrication inclusions.
10
Can I obtain a current Structural Beams price per tonne?
Yes, Structural Beams can be requested on a dated per-tonne basis for a defined specification. State the section, grade, standards, length, quantity, finish, MTC, inspection and destination. Compare quotations on the same weight basis, tax, freight, cutting and documentation terms.
11
Which factors change the cost of Structural Beams?
The landed cost of Structural Beams depends on base steel price, grade, unit mass, size availability, order mix, length, cutting, drilling, finish, testing, inspection, packing and transport. Mixed or uncommon sections may have different conversion and logistics costs from a repetitive bulk order.
12
What is the MOQ for Structural Beams?
The page states an MOQ of 1 tonne. MOQ should still be confirmed where the order mixes sizes, asks for uncommon sections, special lengths, coatings, third-party inspection or export packing. Send the piece count and tonnage for every line item.
13
Is every Structural Beams section available from stock?
Do not assume every Structural Beams section, grade and length is ready stock. Availability must be checked against the exact specification, quantity and enquiry date. If the programme is critical, state the required delivery date and ask the quotation to identify the stock, mill or production basis.
14
Can Structural Beams be supplied with an MTC?
An MTC requirement for Structural Beams should be stated before ordering. Specify certificate type, heat or batch traceability, grade standard, subgrade and any project format. Check that the certificate relates to the supplied markings and ordered thickness; a generic document does not prove project compliance.
15
What inspection should be specified for Structural Beams?
Inspection for Structural Beams should verify identification, section dimensions, web and flange thickness, length, straightness, surface condition, quantity, marking and MTC traceability. If third-party inspection is required, state the agency, inspection stage, hold points, acceptance criteria and required reports in the enquiry.
16
Can Structural Beams be cut, drilled or fabricated?
Cutting, drilling or fabrication for Structural Beams can be reviewed from an approved drawing. Provide cut lengths, hole diameters and centres, copes, notches, end plates, weld details, tolerances and piece marks. Structural connections and welding procedures remain subject to engineer and fabricator approval.
17
What finish or corrosion-protection options can be reviewed?
The live page refers to hot-rolled, galvanised or customer-specified finishes for Structural Beams. State the required surface preparation, paint or galvanising standard, coating inspection and cut-edge repair. Coating does not replace corrosion design, drainage, maintenance or fire-protection requirements.
18
Which applications commonly use Structural Beams?
Structural Beams is considered for commercial and residential frames, industrial buildings, infrastructure and equipment platforms. Suitability depends on section properties, grade, span, restraints, loading, connections, exposure and fire requirements. For any load-bearing use, the final section and grade must follow approved calculations, drawings, BOQ and project standards.
19
Can Ferrite supply Structural Beams in Mumbai, Navi Mumbai and Maharashtra?
Ferrite can review Structural Beams enquiries for Mumbai, Navi Mumbai, Maharashtra, nearby states, India-wide supply and export requirements. Availability and logistics depend on the exact size and quantity. Provide the delivery postcode or destination port, unloading constraints, Incoterm and required date.
20
What information is needed for a fast Structural Beams quotation?
For a fast Structural Beams quotation, send the section designation, profile, dimensions, unit mass if specified, grade, standards, length, pieces, tonnage, finish, make preference, MTC and inspection requirements. Add fabrication drawings, delivery postcode or port, Incoterm and required date where applicable.
