Straight answers on sizes, thickness, weight, grades, MTC, pricing and ordering — so your enquiry is specification-ready before you send it.
01
What are hot rolled sheets?
Hot Rolled Sheets are stainless steel sheets processed by hot rolled methods. They are generally selected for general fabrication where surface appearance and close dimensional control are secondary to forming and economical material supply. The purchase specification should still state the material grade, governing standard, thickness, width, length, finish and required documentation because the rolling route does not itself define the alloy grade.
02
What is the difference between hot rolled and cold rolled stainless steel sheets?
Hot rolled sheet is processed at elevated temperature and commonly has a less refined surface and wider dimensional variation. Cold rolled sheet receives further reduction for a smoother finish and closer control. Select by the finished component requirement, not appearance alone, and confirm grade, thickness, tolerance and surface condition in the purchase order.
03
Does the rolling process identify the stainless steel grade?
No. ‘hot rolled’ describes the processing route, while the grade identifies chemical and material requirements. A buyer must specify both. Substituting one grade for another because the finish looks similar can create corrosion, welding or service problems and requires end-user or engineer approval.
04
Which surface condition should be specified for hot rolled sheets?
State the required finish or surface condition rather than ordering only by the words ‘hot rolled’. Consider mill scale, pickling condition and the rougher as-rolled surface. If the surface will be visible, painted, polished, welded or hygienic, include acceptance criteria or an approved sample so supplier quotations cover the same requirement.
05
Are hot rolled sheets suitable for precision components?
They can be considered when the stated thickness, flatness and finish meet the drawing. For precision parts, mill scale, pickling condition and the rougher as-rolled surface must be reviewed carefully. The final choice should follow the approved component drawing, tolerance schedule and fabrication route rather than a general description of the rolling process.
06
How does rolling condition affect forming and fabrication?
Rolling condition influences hardness, surface condition, dimensional control and forming behaviour. Buyers should disclose deep drawing, tight bending, welding or polishing requirements so the material condition can be reviewed. Bend radii, tooling and structural performance must be established by the fabricator or responsible engineer for the actual grade and thickness.
07
What should be checked when comparing hot rolled and cold rolled quotations?
Compare the same grade, standard, thickness tolerance, width, length, finish, edge condition, quantity and test documentation. A lower quotation may refer to a different surface condition or dimensional requirement. Freight, cutting, packing and taxes should also be separated to make the commercial comparison meaningful.
08
Can hot rolled sheets be supplied for visible architectural work?
They may be considered, but the visible result depends heavily on mill scale, pickling condition and the rougher as-rolled surface. State the viewing side, finish, protective-film need, grain direction and acceptance sample where appearance matters. Outdoor or structural use must also follow the approved grade, drawing and environmental assessment.
09
What sizes are listed for hot rolled sheets?
The published stainless steel sheet range lists thicknesses of 3, 4, 5, 6, 8, 10, 12, 16, 20, 22, 25, 28, 32, 36, 40, 45, 50, 55, 60, 65, 70, 75, 80, 90 and 100 mm and widths of 1200, 1500, 1800 and 2400 mm; length is available on request. Actual availability should be confirmed for the required grade, finish and quantity. State the finished or mill size clearly because cutting allowances can change the ordered dimensions and weight.
10
How is the weight of hot rolled sheets calculated?
Sheet weight is estimated from length x width x thickness x the applicable material density, with all units converted consistently. Perforated sheet weight must also account for removed open area. Use the supplier’s confirmed theoretical or actual weight basis for ordering, freight and invoicing rather than treating a generic calculator as final.
11
Is a weight chart available for hot rolled sheets?
The live page provides thickness-based weights across 1200, 1500, 1800 and 2400 mm. A weight chart is useful for budgeting and logistics, but buyers should verify the basis, units and density for the specified grade. For cut or perforated sheets, ask whether quotation weight is theoretical, calculated net weight or actual dispatch weight.
12
What is the price per kg of hot rolled sheets?
There is no reliable fixed current price per kg because stainless steel values change with grade, dimensions, finish, quantity, mill or make, testing, cutting, packing and freight. Request a dated quotation with the complete specification and delivery postcode. Confirm whether GST, transport and processing charges are included or shown separately.
13
How is the price per tonne for hot rolled sheets determined?
The price per tonne is based on the specified grade and market level, then adjusted for sheet dimensions, finish, quantity, source, processing, documentation and logistics. For a comparable quotation, provide total tonnage and piece count together. Ask for the quote validity and whether billing follows theoretical or actual weight.
14
What is the MOQ for hot rolled sheets?
The supplied product page states a minimum order quantity of 1 ton. MOQ can still be affected by grade, dimension, finish and processing, so confirm it for the exact enquiry. Include piece quantity and total tonnage; this helps determine whether the requirement aligns with available material and commercial supply conditions.
15
Can stock availability of hot rolled sheets be confirmed before ordering?
Yes, availability should be confirmed against the exact grade, thickness, width, length, finish and quantity at the enquiry stage. Do not assume every listed size is ready stock. Ask the supplier to identify available material, mill or make where relevant, documentation status and any processing required before dispatch.
16
Can an MTC be requested with hot rolled sheets?
An MTC can be requested at the enquiry stage and should identify the heat, grade, governing standard and reported test results. State whether an EN 10204 document type or project-specific format is required. Documentation availability must be confirmed before order placement, especially for tenders, coded fabrication and export consignments.
17
Can third-party inspection be arranged for hot rolled sheets?
Third-party inspection requirements can be reviewed when they are stated before quotation. Provide the inspection agency, inspection and test plan, witness or hold points, acceptance criteria and documentation format. Inspection scope, access, charges and scheduling should be agreed in the purchase order; do not assume it is included in the base material price.
18
Can hot rolled sheets be cut or fabricated to a drawing?
Cutting or fabrication requirements can be reviewed against the drawing, grade, thickness, tolerances and quantity. Send a controlled drawing showing finished dimensions, holes, bends, welds, edge condition and inspection points. Structural or pressure-related fabrication must follow the approved drawing, code and responsible engineer’s approval.
19
Does Ferrite supply hot rolled sheets in Mumbai, Navi Mumbai and Maharashtra?
Ferrite Structural Steels Pvt Ltd has sales operations in Mumbai and a location in Kalamboli, Navi Mumbai. Buyers in Mumbai, Navi Mumbai, Maharashtra and nearby states should provide the delivery postcode, unloading constraints and required date. Product availability, freight and dispatch arrangements must be confirmed for the specified order.
20
Can buyers request India-wide or export quotations for hot rolled sheets?
India-wide and export requirements can be reviewed based on quantity, destination and specification. For domestic supply, provide the delivery postcode. For export, provide destination port, Incoterm, packing requirement, documentation, inspection scope and shipment quantity. Availability and commercial terms should be confirmed before treating the quotation as an order commitment.
