Straight answers on sizes, thickness, weight, grades, MTC, pricing and ordering — so your enquiry is specification-ready before you send it.
01
What is a mild steel I beam?
Mild Steel I Beam refers to an I-shaped section whose web and flanges provide bending efficiency. It is used in building frameworks, bridges, warehouses, machinery supports and strengthening work. For structural work, the exact section, material grade, standard and connection detail must follow the approved drawings and calculations; a product-family name does not establish a safe load.
02
Why does an I beam have a web and two flanges?
Mild Steel I Beam is distinguished by its cross-sectional geometry. The web primarily separates the flanges, while the flanges contribute strongly to bending resistance about the major axis. Actual capacity depends on section properties, unbraced length, loading, restraints, connections and the governing design code.
03
How is an MS I beam different from an H beam?
Mild Steel I Beam must be compared using the actual geometry and section properties, not only the familiar “I” or “H” label. Flange width, flange thickness, web thickness, root radius and unit mass influence behaviour. The approved section designation and orientation must control procurement.
04
What MS I beam sizes are listed by Ferrite?
The live page lists 75 x 40 mm to 400 x 100 mm for Mild Steel I Beam. Treat this as a catalogue range rather than proof that every combination is ready stock. Send the exact designation, grade, length and quantity so the required section can be checked against the applicable table and current availability.
05
What thickness range is stated for mild steel I beams?
The page states a thickness range of 3 mm to 25 mm. Web and flange thicknesses are not always the same, and a nominal section designation does not replace a full section table. Confirm the exact geometry and permissible tolerances before fabrication drawings are released.
06
How should an I-beam section be written in a BOQ?
Write the complete section designation used by the governing table, plus material grade, standard, length, quantity and finish. Avoid ordering only by overall depth and flange width because sections with similar headline dimensions can have different web, flange, radius, mass and properties.
07
How can I check I beam weight per metre?
Published weight per metre is a section-identification and quantity-estimation aid. Confirm it for the exact section table and standard. Total theoretical weight equals unit mass multiplied by ordered length and piece count; commercial settlement may use actual or theoretical weight as expressly stated in the quotation.
08
Can an I beam size be selected from span alone?
No supplier should issue a structural load recommendation without design inputs and calculations. Safe capacity depends on section properties, span, support and restraint conditions, load combinations, buckling, deflection, connections, fire design and code requirements. The responsible engineer must approve the final section.
09
How is the Mild Steel I Beam price per kg calculated?
A fixed current Mild Steel I Beam price per kg should not be published because steel input cost, grade, section mass, quantity, length, finish and market date change. Provide the exact section, standard, total tonnage and delivery postcode for a dated quotation, and confirm GST, freight and fabrication inclusions.
10
How can a buyer request a dated Mild Steel I Beam tonne rate?
Yes, Mild Steel I Beam can be requested on a dated per-tonne basis for a defined specification. State the section, grade, standards, length, quantity, finish, MTC, inspection and destination. Compare quotations on the same weight basis, tax, freight, cutting and documentation terms.
11
Why may two Mild Steel I Beam quotations differ?
The landed cost of Mild Steel I Beam depends on base steel price, grade, unit mass, size availability, order mix, length, cutting, drilling, finish, testing, inspection, packing and transport. Mixed or uncommon sections may have different conversion and logistics costs from a repetitive bulk order.
12
What minimum order quantity applies to Mild Steel I Beam?
The page states an MOQ of 1 tonne. MOQ should still be confirmed where the order mixes sizes, asks for uncommon sections, special lengths, coatings, third-party inspection or export packing. Send the piece count and tonnage for every line item.
13
Should buyers assume all Mild Steel I Beam sizes are ready stock?
Do not assume every Mild Steel I Beam section, grade and length is ready stock. Availability must be checked against the exact specification, quantity and enquiry date. If the programme is critical, state the required delivery date and ask the quotation to identify the stock, mill or production basis.
14
Is an MTC available for a Mild Steel I Beam order?
An MTC requirement for Mild Steel I Beam should be stated before ordering. Specify certificate type, heat or batch traceability, grade standard, subgrade and any project format. Check that the certificate relates to the supplied markings and ordered thickness; a generic document does not prove project compliance.
15
Which documents should accompany Mild Steel I Beam inspection?
Inspection for Mild Steel I Beam should verify identification, section dimensions, web and flange thickness, length, straightness, surface condition, quantity, marking and MTC traceability. If third-party inspection is required, state the agency, inspection stage, hold points, acceptance criteria and required reports in the enquiry.
16
Can fabrication requirements be included with a Mild Steel I Beam enquiry?
Cutting, drilling or fabrication for Mild Steel I Beam can be reviewed from an approved drawing. Provide cut lengths, hole diameters and centres, copes, notches, end plates, weld details, tolerances and piece marks. Structural connections and welding procedures remain subject to engineer and fabricator approval.
17
Can Mild Steel I Beam be supplied in mill, painted or galvanised finish?
The live page refers to hot-rolled, galvanised or customer-specified finishes for Mild Steel I Beam. State the required surface preparation, paint or galvanising standard, coating inspection and cut-edge repair. Coating does not replace corrosion design, drainage, maintenance or fire-protection requirements.
18
Where is Mild Steel I Beam normally used?
Mild Steel I Beam is considered for building frameworks, bridges, warehouses, machinery supports and strengthening work. Suitability depends on section properties, grade, span, restraints, loading, connections, exposure and fire requirements. For any load-bearing use, the final section and grade must follow approved calculations, drawings, BOQ and project standards.
19
Where can I buy Mild Steel I Beam in Mumbai or nearby states?
Ferrite can review Mild Steel I Beam enquiries for Mumbai, Navi Mumbai, Maharashtra, nearby states, India-wide supply and export requirements. Availability and logistics depend on the exact size and quantity. Provide the delivery postcode or destination port, unloading constraints, Incoterm and required date.
20
What should an India-wide or export Mild Steel I Beam enquiry include?
For a fast Mild Steel I Beam quotation, send the section designation, profile, dimensions, unit mass if specified, grade, standards, length, pieces, tonnage, finish, make preference, MTC and inspection requirements. Add fabrication drawings, delivery postcode or port, Incoterm and required date where applicable.
